Are you looking quote for part PD07CBSSSGBEC32? The Warner Robins Air Logistics Center-manufactured component (CAGE Code: 98752) is documented under NSN 6625-01-521-8463 as Resistance Standard. For the fastest quote, please complete our RFQ form with details about PD07CBSSSGBEC32. We guarantee a response within 15 minutes.
ASAP Components provides the verified PD07CBSSSGBEC32, classified under INC 04897, FSG 66 Instruments and Laboratory Equipment, FSC 6625 Electrical And Electronic Properties Measuring And Testing Instruments, NIIN 01-521-8463, and NCB 01. Submit your requirements today to receive immediate pricing and availability information.
| MRC | Criteria | Characteristic |
|---|---|---|
| FEAT | SPECIAL FEATURES | POWER 120 VAC +/- 10%, 60HZ +/- 3%; WEIGHT 300 LBS.; RACK IS REQUIRED FOR THIS SYSTEM; OPERATING TEMP. 22.8DEGREES C, +/- 3.3 DEGREES C; COMPLETE SET OF INTERFACE CABLES INCLUDED; 200 FEET OF SHIELDED SOILD COPPER WIRE SUITABLE FOR MAKING STANDARD 4 WIRE, LOW NOISE, LOW THERMAL, RESISTANCE MEASUREMENTS; PROCESS CONTROLLER SHALL BE A MINIMUM OF 200MHZ INTEL PENTIUM, 32MB MEMORY, 1GB HARD DRIVE AND 17"" MONITOR;COMPLIANCE VOLTAGE +/- 30 VOLTS; TOTAL MEASUREMENT/UNCERTAINITY, RESISTANCE RANGE 0.1 TO 100M, UNCERTAINITY <1 TO <25, TEST CURRENT RANGE 10MICROAMP TO 150 MILLI-AMP CONTINUOUSLY VARIABLE |
| ALFK | CASE | NOT PROVIDED |
| ABMK | OVERALL WIDTH | 36.000 INCHES NOMINAL |
| BDHN | TERMINAL LOCATION CONFIGURATION | REAR PANEL |
| ABHP | OVERALL LENGTH | 72.000 INCHES NOMINAL |
| AAPP | ELECTRICAL RESISTANCE | 100.0 MEGOHMS |
| AARA | TERMINAL QUANTITY | 2 AND 4 |
| End Use : 21160 | Measuring, testing, control instruments |
|---|---|
| Schedule B : 9030908030 (NAICS 334515) | Parts and accessories of articles of schedule b subheading 9030.39 |
| SITC : 87479 | Parts and accessories for instruments and apparatus (except meters) measuring etc. Electrical quanities and devices measuring etc. Ionized radiations |
| ADPE | Represents items with no adp components |
|---|---|
| CRITL | The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. |
| HMIC | P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of federal standard 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item. |
| PMIC | A - Item does not contain precious metal. |
| AAC | W |
|---|---|
| Classification Control | U |
| MGMT_CTL | --yrh-n |
| Quantity per pack | 1 |
| Repariability | |
| Shelf Life | N/A |
| SOS | Flz |
| Unit of Measure | Ea |
| ACC: | V - Trailers, vehicles, machinery, shop and warehouse equipment and supplies including special tools and equipment, ground servicing |
|---|---|
| ADC: | A - Shipment is not a consolidation and does not exceed 84 inches in any dimension. |
| LCL: | P - 77.5 |
| LTL: | W - Rating variable |
| NMFC: | 061700 - Elec appliances/instruments noi |
| SHC: | 9 - Other or no special handling required (sh) |
| TCC: | 3 - Electrostatic sensitive device (esd) |
| WCC: | 72D - Communications/electronics, other than sigint/ew or comsec repair parts and components |
