Are you looking quote for part S378-10P? The Umpco Inc-manufactured component (CAGE Code: 18076) is documented under NSN 5340-00-971-7546 as Clip Spring Tension. For the fastest quote, please complete our RFQ form with details about S378-10P. We guarantee a response within 15 minutes.
ASAP Components provides the verified S378-10P, classified under INC 20815, FSG 53 Hardware and Abrasives, FSC 5340 Hardware Commercial, NIIN 00-971-7546, and NCB 00. Submit your requirements today to receive immediate pricing and availability information.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 5340-00-971-7546 Item PartTypeName: CLIP,SPRING TENSION | 5340 | 009717546 | 0 | P | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | A | |||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| 10638583 | 2 | 2 | 5 |
| MRC | Criteria | Characteristic |
|---|---|---|
| AAUB | HOLE DIAMETER | 0.172 INCHES NOMINAL |
| ABGL | WIDTH | 0.500 INCHES NOMINAL |
| ABKW | OVERALL HEIGHT | 1.125 INCHES NOMINAL |
| ABPX | MATERIAL THICKNESS | 0.024 INCHES NOMINAL |
| ABRY | LENGTH | 0.688 INCHES NOMINAL |
| AGAV | END ITEM IDENTIFICATION | W/S:AIRCRAFT,ORION P-3 |
| AZWE | DISTANCE FROM LOOP CENTER TO END | 0.625 INCHES NOMINAL |
| CJYS | LOOP/HOLDING DIMENSION | 0.625 INCHES NOMINAL |
| MATT | MATERIAL | STEEL COMP 304 OVERALL |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | QQ-S-766,COND A FED SPEC SINGLE MATERIAL RESPONSE OVERALL |
| SFTT | SURFACE TREATMENT | CADMIUM AND RUBBER CHLOROPRENE CLASS CR OVERALL |
| End Use : 12300 | Finished metal shapes |
|---|---|
| Schedule B : 7326908530 (NAICS 332999) | Hangers and similar supports for tubes and pipes, of iron or steel |
| SITC : 69969 | Articles of iron or steel, n.E.S. |
| CRITL | The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. |
|---|---|
| HMIC | P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of federal standard 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item. |
| PMIC | A - Item does not contain precious metal. |
| AAC | Z |
|---|---|
| Classification Control | U |
| MGMT_CTL | T2200x- |
| Quantity per pack | 1 |
| Repariability | This is a nonreparable item. if condemned or economically unserviceable, then dispose at the level authorized replace the item. |
| Shelf Life | N/A |
| SOS | Sms |
| Unit of Measure | Ea |
| ACC: | B - Construction materials: includes paint and related materials, prefabricated building, wood products, metal and composition mater |
|---|---|
| ADC: | A - Shipment is not a consolidation and does not exceed 84 inches in any dimension. |
| LTL: | Q - 70.0 |
| NMFC: | 094220 - Clips sheet steel noi |
| SHC: | 9 - Other or no special handling required (sh) |
| TCC: | Z - No special type of cargo code applicable |
| WCC: | 713 - Metal hardware |
