| MRC | Criteria | Characteristic |
|---|
| AAGR | CROSS-SECTIONAL SHAPE STYLE | ROUND" |
| AAJD | THREAD CLASS | 2B 1ST END" |
| AAJF | THREAD DIRECTION | RIGHT-HAND 1ST END" |
| AARX | INSIDE DIAMETER | 0.500 INCHES NOMINAL" |
| ABJH | TEMP RATING | -65.0 DEG FAHRENHEIT SINGLE RESPONSE AND 450.0 DEG FAHRENHEIT SINGLE RESPONSE" |
| ABKV | OUTSIDE DIAMETER | 0.656 INCHES NOMINAL" |
| ACKH | MINIMUM INSIDE BENDING RADIUS | 5.500 INCHES" |
| AGAV | END ITEM IDENTIFICATION | FORCE SYSTEM, REFUELER" |
| AHNC | CONNECTION STYLE | FLARE 1ST END" |
| AKUU | END CONNECTION DESIGN | STRAIGHT 1ST END" |
| AWLS | CONNECTION TYPE | THREADED INTERNAL TUBE 1ST END" |
| CQBD | BURST TEST PRESSURE | 5500.0 POUNDS PER SQUARE INCH" |
| CQCS | LAYER COMPOSITION AND LOCATION | OUTER LAYER BRAIDED CORROSION RESISTANT STEEL WIRE" |
| CQGM | MAXIMUM OPERATING PRESSURE | 1500.0 POUNDS PER SQUARE INCH" |
| CQJX | NOMINAL THREAD SIZE | 0.875 INCHES 1ST END" |
| CQRB | SEAT ANGLE | 37.0 DEGREES 1ST END" |
| CRWL | INSIDE SURFACE CONDITION | SMOOTH" |
| CRXX | MEASURING METHOD AND LENGTH | 41.500 INCHES NOMINAL OVERALL" |
| CXCY | PART NAME ASSIGNED BY CONTROLLING AGENCY | ASSEMBLY, HOSE FUEL PIPING ((STATIC DISSIPATING)" |
| FEAT | SPECIAL FEATURES | LOCATION OF HOSE ASSY: PUMP INLET TO TEE UNDER AIR ELIMINATOR; HOSE HAS STAINLESS STEEL, FEMALE JIC FITTINGS ON BOTH ENDS." |
| THSD | THREAD SERIES DESIGNATOR | UNF 1ST END" |
| AAGR | CROSS-SECTIONAL SHAPE STYLE | ROUND" |
| AAJD | THREAD CLASS | 2B 1ST END" |
| AAJF | THREAD DIRECTION | RIGHT-HAND 1ST END" |
| AARX | INSIDE DIAMETER | 0.500 INCHES NOMINAL" |
| ABJH | TEMP RATING | -65.0 DEG FAHRENHEIT SINGLE RESPONSE AND 450.0 DEG FAHRENHEIT SINGLE RESPONSE" |
| ABKV | OUTSIDE DIAMETER | 0.656 INCHES NOMINAL" |
| ACKH | MINIMUM INSIDE BENDING RADIUS | 5.500 INCHES" |
| AGAV | END ITEM IDENTIFICATION | FORCE SYSTEM, REFUELER" |
| AHNC | CONNECTION STYLE | FLARE 1ST END" |
| AKUU | END CONNECTION DESIGN | STRAIGHT 1ST END" |
| AWLS | CONNECTION TYPE | THREADED INTERNAL TUBE 1ST END" |
| CQBD | BURST TEST PRESSURE | 5500.0 POUNDS PER SQUARE INCH" |
| CQCS | LAYER COMPOSITION AND LOCATION | OUTER LAYER BRAIDED CORROSION RESISTANT STEEL WIRE" |
| CQGM | MAXIMUM OPERATING PRESSURE | 1500.0 POUNDS PER SQUARE INCH" |
| CQJX | NOMINAL THREAD SIZE | 0.875 INCHES 1ST END" |
| CQRB | SEAT ANGLE | 37.0 DEGREES 1ST END" |
| CRWL | INSIDE SURFACE CONDITION | SMOOTH" |
| CRXX | MEASURING METHOD AND LENGTH | 41.500 INCHES NOMINAL OVERALL" |
| CXCY | PART NAME ASSIGNED BY CONTROLLING AGENCY | ASSEMBLY, HOSE FUEL PIPING ((STATIC DISSIPATING)" |
| FEAT | SPECIAL FEATURES | LOCATION OF HOSE ASSY: PUMP INLET TO TEE UNDER AIR ELIMINATOR; HOSE HAS STAINLESS STEEL, FEMALE JIC FITTINGS ON BOTH ENDS." |
| THSD | THREAD SERIES DESIGNATOR | UNF 1ST END" |
