Are you looking quote for part 32-58070-63? The Ricmar Engineering Inc-manufactured component (CAGE Code: 4N300) is documented under NSN 5330-00-815-4981 as Gasket. For the fastest quote, please complete our RFQ form with details about 32-58070-63. We guarantee a response within 15 minutes.
ASAP Components provides the verified 32-58070-63, classified under INC 04522, FSG 53 Hardware and Abrasives, FSC 5330 Packing and Gasket Materials, NIIN 00-815-4981, and NCB 00. Submit your requirements today to receive immediate pricing and availability information.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 5330-00-815-4981 Item PartTypeName: GASKET | 5330 | 008154981 | 0 | P | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | U | |||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| 036957-1 | 6 | 2 | 3 |
| MRC | Criteria | Characteristic |
|---|---|---|
| AAGR | CROSS-SECTIONAL SHAPE STYLE | METAL AND SYNTHETIC RUBBER |
| ABHP | OVERALL LENGTH | 3.562 INCHES NOMINAL |
| ABMK | OVERALL WIDTH | 3.562 INCHES NOMINAL |
| ABVL | APERTURE DIAMETER | 2.800 INCHES NOMINAL |
| ADPW | OUTSIDE CORNER RADIUS | 0.420 INCHES NOMINAL |
| ADUY | CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG WIDTH | 2.722 INCHES NOMINAL |
| ADUZ | CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG LENGTH | 2.722 INCHES NOMINAL |
| ADVD | OUTSIDE EDGE TO BOLT HOLE CENTER DISTANCE ALONG WIDTH | 0.420 INCHES NOMINAL |
| ADVE | OUTSIDE EDGE TO BOLT HOLE CENTER DISTANCE ALONG LENGTH | 0.420 INCHES NOMINAL |
| ADVM | CROSS-SECTIONAL THICKNESS | 0.120 INCHES MINIMUM AND 0.209 INCHES MAXIMUM |
| ADWF | GAGE RING THICKNESS | 0.080 INCHES MINIMUM AND 0.169 INCHES MAXIMUM |
| SFTT | SURFACE TREATMENT | ANODIZE OVERALL |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | MIL-A-8625,TY 2 MIL SPEC SINGLE TREATMENT RESPONSE OVERALL |
| ZZZV | FSC APPLICATION DATA | FUEL LINES,FABRICATED,AIRFRAME |
| CRITL | The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. |
|---|---|
| HMIC | P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of federal standard 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item. |
| PMIC | U - Precious metal content is unknown |
| AAC | Z |
|---|---|
| Classification Control | U |
| MGMT_CTL | Sf9bf-n |
| Quantity per pack | No qup |
| Repariability | |
| Shelf Life | N/A |
| SOS | Sms |
| Unit of Measure | Ea |
| ACC: | A - Supplies and equipment for aircraft and aerial targets, including aircraft and maintenance parts, aircraft accessories, aircraft |
|---|---|
| ADC: | A - Shipment is not a consolidation and does not exceed 84 inches in any dimension. |
| LCL: | M - 85.0 |
| LTL: | K - 92.5 |
| NMFC: | 194120 - Washers/gaskets/pckg dvcs noi sub7 |
| SHC: | Z - Other or no special handling required (sh) |
| TCC: | Z - No special type of cargo code applicable |
| WCC: | 596 - Gaskets, (machinery and parts),(less than 35 feet) |
