Are you looking quote for part LK40-205Y? The Plastic Capacitors Inc-manufactured component (CAGE Code: 99120) is documented under NSN 5910-01-005-6378 as Capacitor Fixed Pla. For the fastest quote, please complete our RFQ form with details about LK40-205Y. We guarantee a response within 15 minutes.
ASAP Components provides the verified LK40-205Y, classified under INC 00006, FSG 59 Electrical and Electronic Equipment Components, FSC 5910 Capacitors, NIIN 01-005-6378, and NCB 01. Submit your requirements today to receive immediate pricing and availability information.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 5910-01-005-6378 Item PartTypeName: CAPACITOR,FIXED,PLASTIC DIELECTR | 5910 | 010056378 | 0 | P | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | U | |||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| 213-990074-975 | 5 | 2 | 5 |
| MRC | Criteria | Characteristic |
|---|---|---|
| AAQL | BODY STYLE | W/O MTG FACILITIES,TERMINAL(S) ON ONE SURFACE |
| AARG | RELIABILITY INDICATOR | NOT ESTABLISHED |
| ADAQ | BODY LENGTH | 3.750 INCHES NOMINAL |
| ADAT | BODY WIDTH | 1.750 INCHES NOMINAL |
| ADAU | BODY HEIGHT | 4.500 INCHES NOMINAL |
| AEBP | CENTER TO CENTER DISTANCE BETWEEN TERMINALS PARALLEL TO LENGTH | 2.000 INCHES NOMINAL |
| AEBU | TERMINAL HEIGHT FROM BODY | 1.125 INCHES MAXIMUM |
| AEBZ | SCHEMATIC DIAGRAM DESIGNATOR | NO COMMON OR GROUNDED ELECTRODE(S) |
| CQBQ | CAPACITANCE VALUE PER SECTION | 2.000 MICROFARADS SINGLE SECTION |
| CQJJ | NONDERATED OPERATING TEMP | -60.0 DEG CELSIUS MINIMUM AND 85.0 DEG CELSIUS MAXIMUM |
| CQWM | NONDERATED CONTINUOUS VOLTAGE RATING AND TYPE PER SECTION | 4000.0 DC SINGLE SECTION |
| CRTP | TOLERANCE RANGE PER SECTION | -10.00 TO 20.00 PERCENT SINGLE SECTION |
| CWJK | CASE MATERIAL | METAL |
| CWPK | INSULATION RESISTANCE AT REFERENCE TEMP | 10000.0 MEGOHM-MICROFARADS |
| CWPN | POWER FACTOR AT REFERENCE TEMP IN PERCENT | 0.9000 |
| CWSG | TERMINAL SURFACE TREATMENT | SOLDER |
| CWSS | DIELECTRIC MATERIAL | PLASTIC |
| TTQY | TERMINAL TYPE AND QUANTITY | 2 STANDOFF,THREADED STUD |
| End Use : 20005 | Electric apparatus |
|---|---|
| Schedule B : 8532250080 (NAICS 334416) | Fixed capacitors, dielectric of paper or plastic, nesoi |
| SITC : 77866 | Paper or plastics dielectric fixed capacitors |
| CRITL | The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. |
|---|---|
| HMIC | P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of federal standard 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item. |
| PMIC | U - Precious metal content is unknown |
| AAC | Z |
|---|---|
| Classification Control | U |
| MGMT_CTL | Q2200x- |
| Quantity per pack | 1 |
| Repariability | Item requires special handling or condemnation procedures for specific reasons, such as precious metal content, high dollar value, critical material, or hazardous materiel. refer to appropriate manuals or directives for specific instructions. |
| Shelf Life | N/A |
| SOS | Sms |
| Unit of Measure | Ea |
| ACC: | H - Instruments/equipment/supplies for radio, communications, electrical, laboratory, etc. (includes signal corps) |
|---|---|
| ADC: | A - Shipment is not a consolidation and does not exceed 84 inches in any dimension. |
| LTL: | P - 77.5 |
| NMFC: | 061400 - Condensers/parts noi/capacitors |
| SHC: | 9 - Other or no special handling required (sh) |
| TCC: | Z - No special type of cargo code applicable |
| WCC: | 72D - Communications/electronics, other than sigint/ew or comsec repair parts and components |
