Are you looking quote for part 2-041 N602-70? The Parker Hannifin Corporation-manufactured component (CAGE Code: C0308) is documented under NSN 5330-01-170-6288 as Packing Preformed. For the fastest quote, please complete our RFQ form with details about 2-041 N602-70. We guarantee a response within 15 minutes.
ASAP Components provides the verified 2-041 N602-70, classified under INC 04521, FSG 53 Hardware and Abrasives, FSC 5330 Packing and Gasket Materials, NIIN 01-170-6288, and NCB 01. Submit your requirements today to receive immediate pricing and availability information.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 5330-01-170-6288 Item PartTypeName: PACKING,PREFORMED | 5330 | 011706288 | P | |||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | ||||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| 2-041 N602-70 | 5 | 9 | 5 |
| MRC | Criteria | Characteristic |
|---|---|---|
| AAGR | CROSS-SECTIONAL SHAPE STYLE | O-RING |
| ABJH | TEMP RATING | -70.0 DEG FAHRENHEIT AND 180.0 DEG FAHRENHEIT |
| ADVL | CROSS SECTION OUTSIDE DIAMETER | 0.067 INCHES MINIMUM AND 0.073 INCHES MAXIMUM |
| ADVN | CROSS-SECTIONAL HEIGHT | 0.067 INCHES MINIMUM AND 0.073 INCHES MAXIMUM |
| ADYT | CENTER HOLE DIAMETER | 2.965 INCHES MINIMUM AND 3.013 INCHES MAXIMUM |
| ADYU | PERIPHERAL DIAMETER | 3.099 INCHES MINIMUM AND 3.159 INCHES MAXIMUM |
| ANYN | ELONGATION PERCENTAGE | 276 MAXIMUM |
| CQFM | HARDNESS RATING | 70.0 SHORE DUROMETER A NOMINAL OVERALL |
| MATT | MATERIAL | RUBBER SYNTHETIC OVERALL |
| End Use : 12770 | Other industrial supplies |
|---|---|
| Schedule B : 3926904500 (NAICS 339991) | Gaskets, washers & other seals |
| SITC : 89399 | Articles of plastics, n.E.S. |
| CRITL | The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. |
|---|---|
| HMIC | P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of federal standard 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item. |
| PMIC | U - Precious metal content is unknown |
