| MRC | Criteria | Characteristic |
|---|
| AAGR | CROSS-SECTIONAL SHAPE STYLE | ROUND |
| AAJD | THREAD CLASS | 2B 1ST END |
| AAJF | THREAD DIRECTION | RIGHT-HAND 1ST END |
| AARX | INSIDE DIAMETER | 0.375 INCHES NOMINAL |
| ABJH | TEMP RATING | -40.0 DEG FAHRENHEIT AND 212.0 DEG FAHRENHEIT SINGLE RESPONSE |
| ABKV | OUTSIDE DIAMETER | 0.740 INCHES NOMINAL |
| ACKH | MINIMUM INSIDE BENDING RADIUS | 2.500 INCHES |
| AGAV | END ITEM IDENTIFICATION | SIDE DOOR PORT-SIDEPORT RAMP SYSTEM P/N 21-10250 |
| AHNC | CONNECTION STYLE | SWIVEL NUT FLARE 1ST END |
| AKUU | END CONNECTION DESIGN | STRAIGHT 1ST END |
| AKXL | END FITTING COMPONENT AND MATERIAL | COMPLETE FITTING STEEL ALL ENDS |
| AKXM | FITTING COMPONENT AND SURFACE TREATMENT | COMPLETE FITTING ZINC 1ST END |
| AWLS | CONNECTION TYPE | THREADED INTERNAL TUBE 1ST END |
| CQBD | BURST TEST PRESSURE | 16000.0 POUNDS PER SQUARE INCH |
| CQCS | LAYER COMPOSITION AND LOCATION | 2ND LAYER BRAIDED STEEL WIRE |
| CQCS | LAYER COMPOSITION AND LOCATION | 3RD LAYER MOLDED RUBBER, SYNTHETIC |
| CQCS | LAYER COMPOSITION AND LOCATION | 4TH LAYER BRAIDED STEEL WIRE |
| CQCS | LAYER COMPOSITION AND LOCATION | OUTER LAYER MOLDED RUBBER, SYNTHETIC |
| CQGM | MAXIMUM OPERATING PRESSURE | 4000.0 POUNDS PER SQUARE INCH |
| CQJX | NOMINAL THREAD SIZE | 0.562 INCHES 1ST END |
| CQRB | SEAT ANGLE | 37.0 DEGREES 1ST END |
| CRWL | INSIDE SURFACE CONDITION | SMOOTH |
| CRXX | MEASURING METHOD AND LENGTH | 33.000 INCHES NOMINAL OVERALL |
| FEAT | SPECIAL FEATURES | INNER CONVEYING TUBE MATERIAL-RUBBER, SYNTHETIC; TUBE MATERIAL IS NEOPRENE |
| MEDA | MEDIA FOR WHICH DESIGNED | HYDRAULIC FLUID SINGLE RESPONSE |
| THSD | THREAD SERIES DESIGNATOR | UNF 1ST END |
| AAGR | CROSS-SECTIONAL SHAPE STYLE | ROUND |
| AAJD | THREAD CLASS | 2B 1ST END |
| AAJF | THREAD DIRECTION | RIGHT-HAND 1ST END |
| AARX | INSIDE DIAMETER | 0.375 INCHES NOMINAL |
| ABJH | TEMP RATING | -40.0 DEG FAHRENHEIT AND 212.0 DEG FAHRENHEIT SINGLE RESPONSE |
| ABKV | OUTSIDE DIAMETER | 0.740 INCHES NOMINAL |
| ACKH | MINIMUM INSIDE BENDING RADIUS | 2.500 INCHES |
| AGAV | END ITEM IDENTIFICATION | SIDE DOOR PORT-SIDEPORT RAMP SYSTEM P/N 21-10250 |
| AHNC | CONNECTION STYLE | SWIVEL NUT FLARE 1ST END |
| AKUU | END CONNECTION DESIGN | STRAIGHT 1ST END |
| AKXL | END FITTING COMPONENT AND MATERIAL | COMPLETE FITTING STEEL ALL ENDS |
| AKXM | FITTING COMPONENT AND SURFACE TREATMENT | COMPLETE FITTING ZINC 1ST END |
| AWLS | CONNECTION TYPE | THREADED INTERNAL TUBE 1ST END |
| CQBD | BURST TEST PRESSURE | 16000.0 POUNDS PER SQUARE INCH |
| CQCS | LAYER COMPOSITION AND LOCATION | 2ND LAYER BRAIDED STEEL WIRE |
| CQCS | LAYER COMPOSITION AND LOCATION | 3RD LAYER MOLDED RUBBER, SYNTHETIC |
| CQCS | LAYER COMPOSITION AND LOCATION | 4TH LAYER BRAIDED STEEL WIRE |
| CQCS | LAYER COMPOSITION AND LOCATION | OUTER LAYER MOLDED RUBBER, SYNTHETIC |
| CQGM | MAXIMUM OPERATING PRESSURE | 4000.0 POUNDS PER SQUARE INCH |
| CQJX | NOMINAL THREAD SIZE | 0.562 INCHES 1ST END |
| CQRB | SEAT ANGLE | 37.0 DEGREES 1ST END |
| CRWL | INSIDE SURFACE CONDITION | SMOOTH |
| CRXX | MEASURING METHOD AND LENGTH | 33.000 INCHES NOMINAL OVERALL |
| FEAT | SPECIAL FEATURES | INNER CONVEYING TUBE MATERIAL-RUBBER, SYNTHETIC; TUBE MATERIAL IS NEOPRENE |
| MEDA | MEDIA FOR WHICH DESIGNED | HYDRAULIC FLUID SINGLE RESPONSE |
| THSD | THREAD SERIES DESIGNATOR | UNF 1ST END |
