Are you looking quote for part HYA22DLPC6-175? The Parker Hannifin Corporation-manufactured component (CAGE Code: 11757) is documented under NSN 2520-00-230-4289 as Power Takeoff Trans. For the fastest quote, please complete our RFQ form with details about HYA22DLPC6-175. We guarantee a response within 15 minutes.
ASAP Components provides the verified HYA22DLPC6-175, classified under INC 18179, FSG 25 Vehicular Equipment Components, FSC 2520 Vehicle Power Transmission Components, NIIN 00-230-4289, and NCB 00. Submit your requirements today to receive immediate pricing and availability information.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 2520-00-230-4289 Item PartTypeName: POWER TAKEOFF,TRANSMISSION | 2520 | 002304289 | P | |||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | ||||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| 10162220 | 2 | 2 | 1 |
| MRC | Criteria | Characteristic |
|---|---|---|
| ABSA | SPLINE QUANTITY | 1 |
| AGJS | PITCH DIAMETER | 0.500 INCHES NOMINAL |
| AXFG | SPLINE PRESSURE ANGLE IN DEG | 30.0 |
| AXYS | SPLINE TYPE | INVOLUTE |
| BDML | CONTROL DEVICE TYPE | LEVER |
| BNXN | DRIVE GEAR TYPE | SPUR |
| BNXX | DRIVE GEAR TEETH QUANTITY | 57 |
| BNXY | DRIVE GEAR TEETH PRESSURE ANGLE IN DEG | 20.0 |
| BNXZ | DRIVE GEAR PITCH | 9.500 |
| BNYH | OUTPUT SHAFT DRIVE END TYPE | SPLINED |
| End Use : 21180 | Industrial machines, other |
|---|---|
| Schedule B : 8483909500 (NAICS 333613) | Parts, nesoi, of bearing housings & plain shaft bearings, housed bearings, clutches, universal joints, flywheels and transmission shafts |
| SITC : 74890 | Parts, n.E.S., for transmission shafts and cranks, bearing housings, gears, gearing, ball screws, gear boxes, flywheels and pulleys, clutches, etc. |
| CRITL | The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. |
|---|---|
| HMIC | P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of federal standard 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item. |
| PMIC | U - Precious metal content is unknown |
| ACC: | B - Construction materials: includes paint and related materials, prefabricated building, wood products, metal and composition mater |
|---|---|
| ADC: | A - Shipment is not a consolidation and does not exceed 84 inches in any dimension. |
| LCL: | W - Rating variable |
| LTL: | W - Rating variable |
| NMFC: | 126880 - Power trans shafting pulleys |
| SHC: | 9 - Other or no special handling required (sh) |
| TCC: | Z - No special type of cargo code applicable |
| WCC: | 885 - Vehicles, mhe, road construction, repair parts and components |
