Are you looking quote for part 26-MIL? The Omatech Service Ltd-manufactured component (CAGE Code: 0B6Z5) is documented under NSN 3416-01-034-1257 as Lathe Engine. For the fastest quote, please complete our RFQ form with details about 26-MIL. We guarantee a response within 15 minutes.
ASAP Components provides the verified 26-MIL, classified under INC 03137, FSG 34 Metalworking Machinery, FSC 3416 Lathes, NIIN 01-034-1257, and NCB 01. Submit your requirements today to receive immediate pricing and availability information.
| MRC | Criteria | Characteristic |
|---|---|---|
| AGLD | Performance Type | LIGHT DUTY |
| ELEC | Voltage In Volts | 220.0 AND 440.0 |
| MRC | Decoded Requirement | Clear Text Reply |
| FREQ | Frequency In Hertz | 50.0 AND 60.0 |
| AWHA | Bed Type | SOLID |
| BTTB | Spindle Speed Range In Rpm | 0.025 |
| FAAZ | Phase | THREE |
| AAXX | Mounting Type | BENCH OR FLOOR |
| AKYD | Accessory Components And Quantity | 1 STOP,CARRIAGE,MICROMETER,1 STOP,THREAD CUTTING,1 INDICATOR,THREAD,1 TAPER ATTACHMENT,1 SET GEARS,1BAG,1 COVER,CANVAS,1 SET WRENCHES,1 WRENCH SPANNER,1 WRENCH,TOOL POST,1 ADAPTER HEADSTOCK,1 ADAPTER,TAILSTOCK,1 CHUCK,3-JAW UNIVERSAL,1 CHUCK4 JAW INDEPENDENT,1 CHUCK,COLLET,1 SET COLLETS,1 CHUCK DRILL,1 FACEPLATE,12 INCH DIAMETER,1 FACEPLATE,24 INCH DIAMETER,2 LATHE CENTERS,1 SET DOG LATHE,1 DOG LATHE,1 STEADYREST,3 SOCKETS,TAPER SHANK TOOL,1 SET DRIFT,DRILL,1 SET TOOL POST,LATHE,1 KNURLING TOOL,2 HOLDERS,3/8 INCH SQUARECUTTER BIT RIGHT AND LEFT HAND TURNING,2 HOLDERS,1/8 X 7/8 INCH CUT-OFF BLADE,RIGHT AND LEFT HAND OFFSET,1 HOLDER,BORING BAR,1 BORING BAR,ROUND,1/2 INCH DIAMETER,1 BORING BAR ROUND,3/4 INCH DIAMETER,1 BORING BAR,ROUND,1-1/8 INCH DIAMETER,3 KNURLING SETS |
| BTSZ | Spindle Speed Quantity | 12 |
| BTTD | Rated Swing | 25.000 INCHES NOMINAL |
| BTYP | Hole Diameter Through Spindle | 3.000 INCHES MINIMUM |
| AWLX | Electric Motor Quantity | 1 |
| BTTF | Actual Swing Over Bed | 25.000 INCHES NOMINAL |
| BTTG | Swing Over Cross Slide | 18.000 INCHES NOMINAL |
| ASHK | Electric Motor Horsepower Rating | 5 |
| ADQR | Center To Center Distance | 30.000 INCHES NOMINAL |
| End Use : 21120 | Metalworking machine tools |
|---|---|
| Schedule B : 8458190030 (NAICS 333517) | Horizontal lathes, metal removing, except numerically controlled, engine or toolroom type, valued $3, 025 and over each, new |
| SITC : 73137 | Horizontal lathes, other than numerically controlled, for removing metal |
| ADPE | Represents items with no adp components |
|---|---|
| CRITL | The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. |
| HMIC | N - Indicates there is no data in the hmirs and the nsn is in a fsc not generally suspected of containing hazardous materials. |
| PMIC | A - Item does not contain precious metal. |
| AAC | B |
|---|---|
| Classification Control | U |
| MGMT_CTL | M21l5n- |
| Quantity per pack | 1 |
| Repariability | When repair is beyond lower level maintenance capability, evacuate the item to depot. disposal is not authorized below wholesale level. |
| Shelf Life | N/A |
| SOS | B14 |
| Unit of Measure | Ea |
| ACC: | V - Trailers, vehicles, machinery, shop and warehouse equipment and supplies including special tools and equipment, ground servicing |
|---|---|
| ADC: | A - Shipment is not a consolidation and does not exceed 84 inches in any dimension. |
| LCL: | M - 85.0 |
| LTL: | W - Rating variable |
| NMFC: | 131670 - Tools pwr o/t pwr hnd tools |
| SHC: | 9 - Other or no special handling required (sh) |
| TCC: | Z - No special type of cargo code applicable |
| WCC: | 72E - Engineer and material handling equipment, test/tool sets and equipment |
