Are you looking quote for part 7524314? The Mil Craft Mfg Inc-manufactured component (CAGE Code: 50036) is documented under NSN 2540-00-525-7067 as Latch Pintle Hook. For the fastest quote, please complete our RFQ form with details about 7524314. We guarantee a response within 15 minutes.
ASAP Components provides the verified 7524314, classified under INC 11401, FSG 25 Vehicular Equipment Components, FSC 2540 Vehicle Furniture and Accessories, NIIN 00-525-7067, and NCB 00. Submit your requirements today to receive immediate pricing and availability information.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 2540-00-525-7067 Item PartTypeName: LATCH,PINTLE HOOK | 2540 | 005257067 | 0 | P | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | U | |||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| 2540PL1969858 | C | 9 | 6 |
| MRC | Criteria | Characteristic |
|---|---|---|
| ABHP | OVERALL LENGTH | 2.187 INCHES NOMINAL |
| ABKW | OVERALL HEIGHT | 5.124 INCHES NOMINAL |
| ABMK | OVERALL WIDTH | 2.000 INCHES NOMINAL |
| AKYJ | PIVOT PIN HOLE DIAMETER | 0.498 INCHES MINIMUM AND 0.502 INCHES MAXIMUM |
| BPBT | PINTLE TYPE FOR WHICH DESIGNED | MANUAL |
| BPBW | THREADED PIVOT PIN LOCKING HOLE | NOT INCLUDED |
| BPCP | DISTANCE FROM PIVOT PIN HOLE CENTER TO ROLLER PIN HOLE CENTER | 2.562 INCHES NOMINAL |
| FEAT | SPECIAL FEATURES | PAINTED OLIVE DRAB,CLASS A SPEC TT-E-529 |
| MATT | MATERIAL | STEEL COMP 4130H OR STEEL COMP 8630H |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | MIL-S-13048,TYPE 8630H OR 4130H MIL SPEC SINGLE MATERIAL RESPONSE |
| End Use : 30230 | Other parts and accessories of vehicles |
|---|---|
| Schedule B : 9403901000 (NAICS 336360) | Parts of furniture of a kind used for motor vehicles |
| SITC : 82180 | Parts of furniture, n.E.S., of metal, wood and other materials |
| CRITL | The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. |
|---|---|
| HMIC | P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of federal standard 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item. |
| PMIC | U - Precious metal content is unknown |
| AAC | Z |
|---|---|
| Classification Control | U |
| MGMT_CTL | J2200x- |
| Quantity per pack | 1 |
| Repariability | This is a nonreparable item. if condemned or economically unserviceable, then dispose at the level authorized replace the item. |
| Shelf Life | N/A |
| SOS | Sms |
| Unit of Measure | Ea |
| ACC: | B - Construction materials: includes paint and related materials, prefabricated building, wood products, metal and composition mater |
|---|---|
| ADC: | A - Shipment is not a consolidation and does not exceed 84 inches in any dimension. |
| LTL: | Q - 70.0 |
| NMFC: | 093880 - Catches/latches metal noi |
| SHC: | 5 - Low sensitivity, category iv, aa&e, unclassified |
| TCC: | Z - No special type of cargo code applicable |
| WCC: | 713 - Metal hardware |
