Quote for GMS5-20-31-4 Lockheed Martin Corporation Part with NSN 5970-00-959-6336

Part Number:  GMS5-20-31-4
Alternate P/N:  GMS520314
Manufacturer:  lockheed martin corporation
NIIN:  9596336
Item Name :  insulation sleeving
CAGE Code:  25500
INC Code:  00867
Country:  USA
NCB Code:  00
FSG:  59 Electrical and Electronic Equipment Components
Last Updated:  02-03-2026

Are you looking quote for part GMS5-20-31-4? The Lockheed Martin Corporation-manufactured component (CAGE Code: 25500) is documented under NSN 5970-00-959-6336 as Insulation Sleeving. For the fastest quote, please complete our RFQ form with details about GMS5-20-31-4. We guarantee a response within 15 minutes.

ASAP Components provides the verified GMS5-20-31-4, classified under INC 00867, FSG 59 Electrical and Electronic Equipment Components, FSC 5970 Electrical Insulators and Insulating Materials, NIIN 00-959-6336, and NCB 00. Submit your requirements today to receive immediate pricing and availability information.

Please fill out below form for GMS5-20-31-4

“*” Required Fields Are Compulsory

NSN Information for Part Number GMS5-20-31-4 with NSN 5970-00-959-6336, 5970009596336

NSNFSCNIINCLSHazmatDEMILCancelled NSN
5970-00-959-6336

Item PartTypeName:

INSULATION SLEEVING,ELECTRICAL

59700095963369P
CIICHCCESDPMICCriticalityENAC
U A
Part NumberISCRNVCRNCCHCCMSDSSADC
0097819225

Characteristics Data of NSN 5970-00-959-6336, 5970009596336

MRCCriteriaCharacteristic
AARGRELIABILITY INDICATORNOT ESTABLISHED
FLEXFLEXIBILITYFLEXIBLE
AGAUHEAT SHRINKAGE RATING IN PERCENT50.0
UKBGDIELECTRIC MATERIAL VOLTAGE RATING PER UNIT THICKNESS500.0 VOLTS PER MIL /0.001 INCH/
AFZLEXPANDED INSIDE DIAMETER1.000 INCHES MINIMUM
CQBCMINIMUM TENSILE STRENGTH1500 POUNDS PER SQUARE INCH
HUESCOLORYELLOW
AFZMRECOVERED INSIDE DIAMETER0.500 INCHES MAXIMUM
ABJHTEMP RATING-55.0 DEG CELSIUS AND 135.0 DEG CELSIUS
ADZCENVIRONMENTAL PROTECTIONCORROSION RESISTANT AND FLAME RESISTANT AND MILDEW RESISTANT AND WATER RESISTANT
AFZNRECOVERED WALL THICKNESS0.030 INCHES MINIMUM AND 0.040 INCHES MAXIMUM
MATLMATERIALPLASTIC, POLYOLEFIN, MIL-I-23053/5, CLASS 1
STYLSTYLE DESIGNATORSHRINKABLE

Schedule B & Trade

End Use : 50030 Military trucks, armored vehicles, etc.
Schedule B : 8710000090 (NAICS 336992) Parts of armored fighting vehicles, motorized, whether or not fitted with weapons
SITC : 89111 Tanks and other armored fighting vehicles, motorized, whether or not fitted with weapons, and parts of such vehicles

Identification

CRITL The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
HMIC P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of federal standard 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.
PMIC A - Item does not contain precious metal.

NSN Management Codes

AAC D
Classification Control U
MGMT_CTL Q224vx-
Quantity per pack 100
Repariability This is a nonreparable item. if condemned or economically unserviceable, then dispose at the level authorized replace the item.
Shelf Life 60 mo.
SOS Sms
Unit of Measure Ft

Freight Information

ACC: H - Instruments/equipment/supplies for radio, communications, electrical, laboratory, etc. (includes signal corps)
ADC: A - Shipment is not a consolidation and does not exceed 84 inches in any dimension.
LTL: W - Rating variable
NMFC: 103300 - Insulating material noi
SHC: 9 - Other or no special handling required (sh)
TCC: Z - No special type of cargo code applicable
WCC: 72D - Communications/electronics, other than sigint/ew or comsec repair parts and components

ASAP Semiconductor’s Certifications And Memberships



bottom to top