Are you looking quote for part 321019? The Linotype Co-manufactured component (CAGE Code: 39736) is documented under NSN 5340-00-864-9694 as Clamp Loop. For the fastest quote, please complete our RFQ form with details about 321019. We guarantee a response within 15 minutes.
ASAP Components provides the verified 321019, classified under INC 17532, FSG 53 Hardware and Abrasives, FSC 5340 Hardware Commercial, NIIN 00-864-9694, and NCB 00. Submit your requirements today to receive immediate pricing and availability information.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 5340-00-864-9694 Item PartTypeName: CLAMP,LOOP | 5340 | 008649694 | P | |||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | ||||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| 321019 | 5 | 9 | 3 |
| MRC | Criteria | Characteristic |
|---|---|---|
| AAAN | INTEGRAL NUT TYPE AND QUANTITY | 1 SELF-LOCKING EQUAL LENGTH TONGUES |
| AAAP | CUSHIONING ENVIRONMENTAL PROTECTION | HEAT |
| ABMK | OVERALL WIDTH | 0.469 INCHES NOMINAL |
| ABPX | MATERIAL THICKNESS | 0.040 INCHES NOMINAL |
| AHMM | LUG WIDTH | 0.469 INCHES NOMINAL |
| AZCY | CENTER TO CENTER DISTANCE BETWEEN LOOP AND MOUNTING HOLE | 0.422 INCHES NOMINAL |
| AZDC | DISTANCE FROM LOOP CENTER TO TONGUE END | 0.641 INCHES NOMINAL |
| AZDE | CENTER TO CENTER DISTANCE BETWEEN LOOP AND LUG HOLE | 0.453 INCHES NOMINAL |
| BZTN | LOOP INSIDE DIAMETER | 0.188 INCHES NOMINAL |
| BZTP | DISTANCE FROM OUTER EDGE OF LUG TO HOLE CENTER | 0.234 INCHES NOMINAL |
| BZTQ | LUG HOLE DIAMETER | 0.173 INCHES NOMINAL |
| MATT | MATERIAL | ALUMINUM ALLOY BAND |
| MATT | MATERIAL | ALUMINUM BONDING STRIP |
| MATT | MATERIAL | RUBBER CUSHION |
| STYL | STYLE DESIGNATOR | LEFT HAND CLAMP & BRACKET |
| CRITL | The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. |
|---|---|
| HMIC | P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of federal standard 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item. |
| PMIC | U - Precious metal content is unknown |
| ACC: | H - Instruments/equipment/supplies for radio, communications, electrical, laboratory, etc. (includes signal corps) |
|---|---|
| ADC: | A - Shipment is not a consolidation and does not exceed 84 inches in any dimension. |
| LCL: | S - 60.0 |
| LTL: | S - 60.0 |
| NMFC: | 061200 - Cable clamps/joints noi |
| SHC: | 9 - Other or no special handling required (sh) |
| TCC: | Z - No special type of cargo code applicable |
| WCC: | 658 - Electrical appliances, small |
