Are you looking quote for part TD86FPS8? The Joint Electronics Type Designation System-manufactured component (CAGE Code: 80058) is documented under NSN 6625-00-562-1853 as Calibrator Range In. For the fastest quote, please complete our RFQ form with details about TD86FPS8. We guarantee a response within 15 minutes.
ASAP Components provides the verified TD86FPS8, classified under INC 00767, FSG 66 Instruments and Laboratory Equipment, FSC 6625 Electrical And Electronic Properties Measuring And Testing Instruments, NIIN 00-562-1853, and NCB 00. Submit your requirements today to receive immediate pricing and availability information.
| MRC | Criteria | Characteristic |
|---|---|---|
| BHXQ | INPUT PULSE POLARITY TYPE | POSITIVE |
| BHXS | OUTPUT POLARITY TYPE | POSITIVE |
| BHXT | MARKER TYPE | RANGE |
| BHXW | MARKER PULSE RECURRENCE FREQUENCY RANGE | 200.0 HERTZ MINIMUM AND 400.0 HERTZ MAXIMUM |
| SR-5 | THE MANUFACTURERS DATA | |
| AKWA | JOINT ELECTRONICS TYPE DESIGNATION SYSTEM ITEM NAME | CALIBRATOR RANGE |
| AQYB | OUTPUT VOLTAGE RATING | 50.0 VOLTS NOMINAL |
| AKWB | JOINT ELECTRONICS TYPE DESIGNATION SYSTEM ITEM TYPE NUMBER | TD-86/FPS-8 |
| SR-5 | MANUFACTURERS CODE | 03538 |
| SR-5 | DESIGN CONTROL REFERENCE | 7603275G2 |
| ANSR | OUTPUT IMPEDANCE RATING | 65.0 OHMS |
| BHXR | INPUT PULSE VOLTAGE RATING | 25.0 VOLTS MINIMUM AND 50.0 VOLTS MAXIMUM |
| BHXP | INPUT PULSE LOCATION | INTERNAL |
| End Use : 21160 | Measuring, testing, control instruments |
|---|---|
| Schedule B : 9030908030 (NAICS 334515) | Parts and accessories of articles of schedule b subheading 9030.39 |
| SITC : 87479 | Parts and accessories for instruments and apparatus (except meters) measuring etc. Electrical quanities and devices measuring etc. Ionized radiations |
| CRITL | The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. |
|---|---|
| HMIC | P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of federal standard 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item. |
| PMIC | U - Precious metal content is unknown |
| ACC: | H - Instruments/equipment/supplies for radio, communications, electrical, laboratory, etc. (includes signal corps) |
|---|---|
| ADC: | A - Shipment is not a consolidation and does not exceed 84 inches in any dimension. |
| LCL: | P - 77.5 |
| LTL: | W - Rating variable |
| NMFC: | 061700 - Elec appliances/instruments noi |
| SHC: | Z - Other or no special handling required (sh) |
| TCC: | Z - No special type of cargo code applicable |
| WCC: | 72D - Communications/electronics, other than sigint/ew or comsec repair parts and components |
