| MRC | Criteria | Characteristic |
|---|
| AAGR | CROSS-SECTIONAL SHAPE STYLE | ROUND" |
| AAJD | THREAD CLASS | 3B 1ST END" |
| AAJF | THREAD DIRECTION | RIGHT-HAND 1ST END" |
| AARX | INSIDE DIAMETER | 0.253 INCHES NOMINAL" |
| ABJH | TEMP RATING | -20.0 DEG FAHRENHEIT AND 165.0 DEG FAHRENHEIT 1ST RESPONSE" |
| ABKV | OUTSIDE DIAMETER | 0.515 INCHES NOMINAL" |
| ACKH | MINIMUM INSIDE BENDING RADIUS | 1.125 INCHES" |
| ADJS | EXTERIOR COLOR | BROWN OR ORANGE" |
| AHNC | CONNECTION STYLE | SWIVEL NUT, FLARELESS 1ST END" |
| AKXL | END FITTING COMPONENT AND MATERIAL | NIPPLE ALUMINUM ALLOY 1ST END" |
| AKXL | END FITTING COMPONENT AND MATERIAL | NUT ALUMINUM ALLOY 2ND END" |
| AKXM | FITTING COMPONENT AND SURFACE TREATMENT | COMPLETE FITTING ANODIZE 1ST END" |
| AWLS | CONNECTION TYPE | THREADED INTERNAL TUBE 1ST END" |
| CQBD | BURST TEST PRESSURE | 500.0 POUNDS PER SQUARE INCH" |
| CQCS | LAYER COMPOSITION AND LOCATION | OUTER LAYER BRAIDED POLYAMIDE CORD" |
| CQGM | MAXIMUM OPERATING PRESSURE | 125.0 POUNDS PER SQUARE INCH" |
| CQRB | SEAT ANGLE | 12.0 DEGREES 1ST END" |
| CRDW | HYDROSTATIC TEST PRESSURE | 250.0 POUNDS PER SQUARE INCH" |
| CRWL | INSIDE SURFACE CONDITION | SMOOTH" |
| CRXX | MEASURING METHOD AND LENGTH | 15.250 INCHES NOMINAL OVERALL" |
| FEAT | SPECIAL FEATURES | EXTERNAL PROTECTION TYPE AND LOCATION- BOTH ENDS SPRING GUARD, ROUND CORROSION RESISTING STEEL COIL, INNER CONVEYING TUBE MATERIAL-PLASTIC,VINYL,FORMULATION E-110 US STONEWARE CO" |
| THSD | THREAD SERIES DESIGNATOR | UNJF 1ST END" |
| ZZZK | SPECIFICATION/STANDARD DATA | 81205-BACH30BC MANUFACTURERS STANDARD" |
| AAGR | CROSS-SECTIONAL SHAPE STYLE | ROUND" |
| AAJD | THREAD CLASS | 3B 1ST END" |
| AAJF | THREAD DIRECTION | RIGHT-HAND 1ST END" |
| AARX | INSIDE DIAMETER | 0.253 INCHES NOMINAL" |
| ABJH | TEMP RATING | -20.0 DEG FAHRENHEIT AND 165.0 DEG FAHRENHEIT 1ST RESPONSE" |
| ABKV | OUTSIDE DIAMETER | 0.515 INCHES NOMINAL" |
| ACKH | MINIMUM INSIDE BENDING RADIUS | 1.125 INCHES" |
| ADJS | EXTERIOR COLOR | BROWN OR ORANGE" |
| AHNC | CONNECTION STYLE | SWIVEL NUT, FLARELESS 1ST END" |
| AKXL | END FITTING COMPONENT AND MATERIAL | NIPPLE ALUMINUM ALLOY 1ST END" |
| AKXL | END FITTING COMPONENT AND MATERIAL | NUT ALUMINUM ALLOY 2ND END" |
| AKXM | FITTING COMPONENT AND SURFACE TREATMENT | COMPLETE FITTING ANODIZE 1ST END" |
| AWLS | CONNECTION TYPE | THREADED INTERNAL TUBE 1ST END" |
| CQBD | BURST TEST PRESSURE | 500.0 POUNDS PER SQUARE INCH" |
| CQCS | LAYER COMPOSITION AND LOCATION | OUTER LAYER BRAIDED POLYAMIDE CORD" |
| CQGM | MAXIMUM OPERATING PRESSURE | 125.0 POUNDS PER SQUARE INCH" |
| CQRB | SEAT ANGLE | 12.0 DEGREES 1ST END" |
| CRDW | HYDROSTATIC TEST PRESSURE | 250.0 POUNDS PER SQUARE INCH" |
| CRWL | INSIDE SURFACE CONDITION | SMOOTH" |
| CRXX | MEASURING METHOD AND LENGTH | 15.250 INCHES NOMINAL OVERALL" |
| FEAT | SPECIAL FEATURES | EXTERNAL PROTECTION TYPE AND LOCATION- BOTH ENDS SPRING GUARD, ROUND CORROSION RESISTING STEEL COIL, INNER CONVEYING TUBE MATERIAL-PLASTIC,VINYL,FORMULATION E-110 US STONEWARE CO" |
| THSD | THREAD SERIES DESIGNATOR | UNJF 1ST END" |
| ZZZK | SPECIFICATION/STANDARD DATA | 81205-BACH30BC MANUFACTURERS STANDARD" |
