Are you looking quote for part XA-762? The Holland Usa Inc-manufactured component (CAGE Code: 74410) is documented under NSN 2540-00-771-4880 as Latch Pintle Hook. For the fastest quote, please complete our RFQ form with details about XA-762. We guarantee a response within 15 minutes.
ASAP Components provides the verified XA-762, classified under INC 11401, FSG 25 Vehicular Equipment Components, FSC 2540 Vehicle Furniture and Accessories, NIIN 00-771-4880, and NCB 00. Submit your requirements today to receive immediate pricing and availability information.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 2540-00-771-4880 Item PartTypeName: LATCH,PINTLE HOOK | 2540 | 007714880 | 0 | P | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | U | |||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| 1201N2 | 2 | 9 | 5 |
| MRC | Criteria | Characteristic |
|---|---|---|
| ABHP | OVERALL LENGTH | 3.812 INCHES NOMINAL |
| ABKW | OVERALL HEIGHT | 1.906 INCHES NOMINAL |
| ABMK | OVERALL WIDTH | 2.312 INCHES MINIMUM AND 2.688 INCHES MAXIMUM |
| AKYJ | PIVOT PIN HOLE DIAMETER | 0.755 INCHES MINIMUM AND 0.760 INCHES MAXIMUM |
| BPBT | PINTLE TYPE FOR WHICH DESIGNED | MANUAL |
| BPBW | THREADED PIVOT PIN LOCKING HOLE | NOT INCLUDED |
| BPCH | WIDTH AT PIVOT PIN HOLE | 1.088 INCHES MINIMUM AND 1.093 INCHES MAXIMUM |
| MATT | MATERIAL | STEEL CORROSION RESISTING |
| STYL | STYLE DESIGNATOR | SPRING LOADED T-LOCK W/COTTER PIN HOLE |
| BPCN | LOCKING PIN HOLE DIAMETER | 0.281 INCHES NOMINAL |
| End Use : 30230 | Other parts and accessories of vehicles |
|---|---|
| Schedule B : 9403901000 (NAICS 336360) | Parts of furniture of a kind used for motor vehicles |
| SITC : 82180 | Parts of furniture, n.E.S., of metal, wood and other materials |
| CRITL | The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. |
|---|---|
| HMIC | P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of federal standard 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item. |
| PMIC | U - Precious metal content is unknown |
| AAC | J |
|---|---|
| Classification Control | U |
| MGMT_CTL | J2200x- |
| Quantity per pack | 1 |
| Repariability | This is a nonreparable item. if condemned or economically unserviceable, then dispose at the level authorized replace the item. |
| Shelf Life | N/A |
| SOS | Sms |
| Unit of Measure | Ea |
| ACC: | B - Construction materials: includes paint and related materials, prefabricated building, wood products, metal and composition mater |
|---|---|
| ADC: | A - Shipment is not a consolidation and does not exceed 84 inches in any dimension. |
| LTL: | Q - 70.0 |
| NMFC: | 093880 - Catches/latches metal noi |
| SHC: | 5 - Low sensitivity, category iv, aa&e, unclassified |
| TCC: | Z - No special type of cargo code applicable |
| WCC: | 713 - Metal hardware |
