Are you looking quote for part Z0220205F3 REV. 1? The Galvotec Alloys Inc-manufactured component (CAGE Code: 0SNJ9) is documented under NSN 5340-01-644-5457 as Anode Corrosion Pre. For the fastest quote, please complete our RFQ form with details about Z0220205F3 REV. 1. We guarantee a response within 15 minutes.
ASAP Components provides the verified Z0220205F3 REV. 1, classified under INC 13154, FSG 53 Hardware and Abrasives, FSC 5340 Hardware Commercial, NIIN 01-644-5457, and NCB 01. Submit your requirements today to receive immediate pricing and availability information.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 5340-01-644-5457 Item PartTypeName: ANODE,CORROSION PREVENTIVE | 5340 | 016445457 | 0 | P | A | |
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | A | A | 0 | |||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| Z0220205F3 REV. 1 | 5 | 2 | 3 |
| MRC | Criteria | Characteristic |
|---|---|---|
| AARN | FABRICATION METHOD | ROLLED PLATE |
| AAUB | HOLE DIAMETER | 0.625 INCHES NOMINAL |
| ABGL | WIDTH | 2.000 INCHES NOMINAL |
| ABRF | CENTER TO CENTER DISTANCE BETWEEN HOLES | 4.000 INCHES NOMINAL |
| ABRY | LENGTH | 9.500 INCHES NOMINAL |
| ABTJ | MOUNTING HOLE QUANTITY | 2 |
| ADJH | MOUNTING METHOD | HOLES |
| ADWK | MINOR HEIGHT | 5.000 INCHES NOMINAL |
| AGAV | END ITEM IDENTIFICATION | SENTINEL CLASS FAST RESPONSE CUTTER B (FRC-B) |
| ANNQ | MATERIAL AND LOCATION | ZINC, MIL-A-18001 OVERALL |
| WGHT | WEIGHT | 22.0 POUNDS |
| ZZZK | SPECIFICATION/STANDARD DATA | (81349)-MIL-DTL-18001 GOVERNMENT SPECIFICATION |
| ADPE | Represents items with no adp components |
|---|---|
| CRITL | The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. |
| ESD | A - No known electrostatic discharge (esd) or electromagnetic interference (emi) sensitivity. |
| HMIC | P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of federal standard 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item. |
| PMIC | A - Item does not contain precious metal. |
| AAC | J |
|---|---|
| Classification Control | U |
| MGMT_CTL | A-09--- |
| Quantity per pack | 1 |
| Repariability | If condemned or economically unserviceable, dispose by theoperator/crew |
| Shelf Life | N/A |
| SOS | Znc |
| Unit of Measure | Ea |
