Are you looking quote for part JMP0-101-0C? The Columbus Electric Mfg Co-manufactured component (CAGE Code: 10594) is documented under NSN 5930-00-826-6915 as Switch Sensitive. For the fastest quote, please complete our RFQ form with details about JMP0-101-0C. We guarantee a response within 15 minutes.
ASAP Components provides the verified JMP0-101-0C, classified under INC 00399, FSG 59 Electrical and Electronic Equipment Components, FSC 5930 Switches, NIIN 00-826-6915, and NCB 00. Submit your requirements today to receive immediate pricing and availability information.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 5930-00-826-6915 Item PartTypeName: SWITCH,SENSITIVE | 5930 | 008266915 | 0 | P | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | U | |||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| 6506968 | 2 | 2 | 3 |
| MRC | Criteria | Characteristic |
|---|---|---|
| AFXE | MAXIMUM VOLTAGE RATING IN VOLTS | 125.0 AC |
| AKNA | INCLOSURE TYPE | FULLY INCLOSED |
| CRLD | NONPILE-UP CONTACT ARRANGEMENT | 1 POLE,SINGLE THROW,NORMALLY OPEN,MOMENTARY ACTION SINGLE SWITCH UNIT |
| CXQQ | ACTUATOR MOVEMENT | 0.060 PRETRAVEL INCHES MAXIMUM AND 0.050 OVERTRAVEL INCHES MINIMUM AND 0.025 DIFFERENTIAL INCHES NOMINAL |
| CXQR | CONTACT LOAD CURRENT RATING AT MAXIMUM RATED VOLTAGE | 5.000 AMPERES RESISTIVE AC |
| CSJN | SWITCH ACTUATING FORCE | 170.0 OUNCES MAXIMUM |
| TTQY | TERMINAL TYPE AND QUANTITY | 2 TAB,SOLDER LUG |
| End Use : 20005 | Electric apparatus |
|---|---|
| Schedule B : 8536509050 (NAICS 335931) | Switches, slide, for a voltage not exceeding 1, 000 v |
| SITC : 77255 | Switches for electrical apparatus, n.E.S., for voltages not exceeding 1, 000 volts |
| CRITL | The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. |
|---|---|
| HMIC | P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of federal standard 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item. |
| PMIC | U - Precious metal content is unknown |
| AAC | Z |
|---|---|
| Classification Control | U |
| MGMT_CTL | 9b----- |
| Quantity per pack | 1 |
| Repariability | |
| Shelf Life | N/A |
| SOS | Sms |
| Unit of Measure | Ea |
| ACC: | H - Instruments/equipment/supplies for radio, communications, electrical, laboratory, etc. (includes signal corps) |
|---|---|
| ADC: | A - Shipment is not a consolidation and does not exceed 84 inches in any dimension. |
| LTL: | P - 77.5 |
| NMFC: | 061300 - Circuit breaker/switch noi |
| SHC: | 9 - Other or no special handling required (sh) |
| TCC: | Z - No special type of cargo code applicable |
| WCC: | 72D - Communications/electronics, other than sigint/ew or comsec repair parts and components |
