| MRC | Criteria | Characteristic |
|---|
| AARX | Inside Diameter | 1.250 INCHES NOMINAL |
| AGAV | End Item Identification | USED ON THE STRATEGIC SEALIFT CONVERSION SHIPS CLASS |
| ABKU | Flange Thickness | 0.405 INCHES NOMINAL 1ST END |
| ABKV | Outside Diameter | 1.960 INCHES NOMINAL |
| MRC | Decoded Requirement | Clear Text Reply |
| CQCS | Layer Composition And Location | 2ND LAYER SPIRALLY WRAPPED CORROSION RESISTANT STEEL FABRIC |
| CQCS | Layer Composition And Location | OUTER LAYER MOLDED RUBBER, SYNTHETIC |
| CQGM | Maximum Operating Pressure | 5000.0 POUNDS PER SQUARE INCH |
| AKUT | End Flange Construction | SPLIT 1ST END |
| AKUU | End Connection Design | ELBOW 2ND END |
| ADJS | Exterior Color | RED |
| AKUT | End Flange Construction | SPLIT 2ND END |
| AKUU | End Connection Design | ELBOW 1ST END |
| CRDW | Hydrostatic Test Pressure | 10000.0 POUNDS PER SQUARE INCH |
| CRXX | Measuring Method And Length | 24.000 INCHES NOMINAL OVERALL |
| ZZZK | Specification/Standard Data | SAE J517, 100R13, 81343 NATIONAL STD/SPEC |
| AKXL | End Fitting Component And Material | COMPLETE FITTING STEEL ALL ENDS |
| AWLS | Connection Type | PLAIN FACE FLANGE 2ND END |
| CRFY | Flow Angle | 90.0 DEGREES 2ND END |
| CRFY | Flow Angle | 90.0 DEGREES 1ST END |
| AWLS | Connection Type | PLAIN FACE FLANGE 1ST END |
| ABKU | Flange Thickness | 0.495 INCHES NOMINAL 2ND END |
| AEPR | Flange Outside Diameter | 2.125 INCHES NOMINAL 1ST END |
| ACKH | Minimum Inside Bending Radius | 16.500 INCHES |
| ABJH | Temp Rating | -40.0 DEG FAHRENHEIT AND 257.0 DEG FAHRENHEIT SINGLE RESPONSE |
| CQBD | Burst Test Pressure | 20000.0 POUNDS PER SQUARE INCH |
| CRWL | Inside Surface Condition | SMOOTH |
| CTCJ | Flange Style | ROUND W/ OUT BOLT HOLES 1ST END |
| CTCJ | Flange Style | ROUND W/ OUT BOLT HOLES 2ND END |
| AHNC | Connection Style | PLAIN SWIVEL W/ GASKET GROOVE 1ST END |
| AAGR | Cross-Sectional Shape Style | ROUND |
| MEDA | Media For Which Designed | FUEL/OIL, HYDROCARBON SINGLE RESPONSE |
| CQCS | Layer Composition And Location | 3RD LAYER SPIRALLY WRAPPED CORROSION RESISTANT STEEL FABRIC |
| AEPR | Flange Outside Diameter | 2.500 INCHES NOMINAL 2ND END |
| FEAT | Special Features | INNER CONVEYING TUBE MATERIAL-RUBBER, SYNTHETIC |
| AHNC | Connection Style | PLAIN SWIVEL W/ GASKET GROOVE 2ND END |
| CQCS | Layer Composition And Location | 4TH LAYER SPIRALLY WRAPPED CORROSION RESISTANT STEEL FABRIC |
| CQCS | Layer Composition And Location | 1ST LAYER SPIRALLY WRAPPED CORROSION RESISTANT STEEL FABRIC |
| ADKX | Angle Between Rigid Elbow Fittings In Deg | 270 |
| CQCS | Layer Composition And Location | 6TH LAYER SPIRALLY WRAPPED CORROSION RESISTANT STEEL FABRIC |
| CQCS | Layer Composition And Location | 5TH LAYER SPIRALLY WRAPPED CORROSION RESISTANT STEEL FABRIC |
