Are you looking quote for part CL187AB? The Caro Inc-manufactured component (CAGE Code: 55985) is documented under NSN 3416-00-240-1310 as Lathe Engine. For the fastest quote, please complete our RFQ form with details about CL187AB. We guarantee a response within 15 minutes.
ASAP Components provides the verified CL187AB, classified under INC 03137, FSG 34 Metalworking Machinery, FSC 3416 Lathes, NIIN 00-240-1310, and NCB 00. Submit your requirements today to receive immediate pricing and availability information.
| MRC | Criteria | Characteristic |
|---|---|---|
| ADQR | CENTER TO CENTER DISTANCE | 27.000 INCHES NOMINAL |
| AAXX | MOUNTING TYPE | BENCH |
| AGLD | PERFORMANCE TYPE | STANDARD DUTY |
| AWLX | ELECTRIC MOTOR QUANTITY | 1 |
| BTTG | SWING OVER CROSS SLIDE | 5.875 INCHES NOMINAL |
| BTWM | HEADSTOCK CENTER TAPER SIZE DESIGNATOR | 2 MORSE |
| BTYR | CARRIAGE LONGITUDINAL FEED OPERATION METHOD | HAND OR POWER |
| BTZR | THREAD QUANTITY RANGE | +4.0/+480.0 PER INCH |
| ACDC | CURRENT TYPE | AC |
| APGF | DESIGN TYPE | SCREW |
| AWHA | BED TYPE | SOLID |
| ASHK | ELECTRIC MOTOR HORSEPOWER RATING | 1.0 |
| ELEC | VOLTAGE IN VOLTS | 440.0 |
| FAAZ | PHASE | THREE |
| ZZZY | REFERENCE NUMBER DIFFERENTIATING CHARACTERISTICS | BTWL,BTWM,BTYP,BTSZ,BTTB,BTYQ,BTYR,BTYS,BTYT,BTYW,AWLX,ASHK,ACDC,ELEC,FREQ,FAAZ AKYD |
| BTSZ | SPINDLE SPEED QUANTITY | 12 |
| BTTB | SPINDLE SPEED RANGE IN RPM | +55.0/+1400.0 |
| BTTD | RATED SWING | 10.000 INCHES NOMINAL |
| BTTF | ACTUAL SWING OVER BED | 10.125 INCHES NOMINAL |
| AKSL | PURPOSE FOR WHICH DESIGNED | GENERAL |
| AKYD | ACCESSORY COMPONENTS AND QUANTITY | 1 BELT SET;1 CHUCK COLLET;1 CHUCK,INDEPENDENT 4 JAW;1 CHUCK,UNIVERSAL 3CHUCK;1 FACE PLATE;1 CARRIAGE STOP,MICROMETER;1 TAPER ATTACHMENT |
| BTWB | THREAD CHANGE QUANTITY | 70 |
| BTWL | HEADSTOCK DRIVE TYPE | STEP CONE PULLEY, BACK GEARED |
| BTYP | HOLE DIAMETER THROUGH SPINDLE | 1.375 INCHES NOMINAL |
| BTYQ | CARRIAGE QUANTITY | 1 |
| FREQ | FREQUENCY IN HERTZ | 60.0 |
| BTYS | CARRIAGE CROSS FEED OPERATION METHOD | POWER OR HAND |
| BTYT | CARRIAGE FEED CHANGE QUANTITY | 70 |
| BTYW | GEAR CHANGE TYPE | QUICK |
| End Use : 21120 | Metalworking machine tools |
|---|---|
| Schedule B : 8458190030 (NAICS 333517) | Horizontal lathes, metal removing, except numerically controlled, engine or toolroom type, valued $3, 025 and over each, new |
| SITC : 73137 | Horizontal lathes, other than numerically controlled, for removing metal |
| CRITL | The item does not have a critical feature such as tolerance, fit restrictions or application. nuclear hardness properties have not been determined (not valid for input). |
|---|---|
| HMIC | N - Indicates there is no data in the hmirs and the nsn is in a fsc not generally suspected of containing hazardous materials. |
| PMIC | U - Precious metal content is unknown |
| AAC | L |
|---|---|
| Classification Control | U |
| MGMT_CTL | Lp*---n |
| Quantity per pack | 1 |
| Repariability | |
| Shelf Life | N/A |
| SOS | |
| Unit of Measure | Ea |
| ACC: | V - Trailers, vehicles, machinery, shop and warehouse equipment and supplies including special tools and equipment, ground servicing |
|---|---|
| ADC: | A - Shipment is not a consolidation and does not exceed 84 inches in any dimension. |
| LTL: | W - Rating variable |
| NMFC: | 131670 - Tools pwr o/t pwr hnd tools |
| SHC: | 9 - Other or no special handling required (sh) |
| TCC: | Z - No special type of cargo code applicable |
| WCC: | 72E - Engineer and material handling equipment, test/tool sets and equipment |
