Are you looking quote for part 6015-11CC? The Augat Inc-manufactured component (CAGE Code: 91506) is documented under NSN 5340-00-999-3994 as Clip Spring Tension. For the fastest quote, please complete our RFQ form with details about 6015-11CC. We guarantee a response within 15 minutes.
ASAP Components provides the verified 6015-11CC, classified under INC 20815, FSG 53 Hardware and Abrasives, FSC 5340 Hardware Commercial, NIIN 00-999-3994, and NCB 00. Submit your requirements today to receive immediate pricing and availability information.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 5340-00-999-3994 Item PartTypeName: CLIP,SPRING TENSION | 5340 | 009993994 | 0 | P | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | U | |||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| 100-300-1-2 | 5 | 1 | 5 |
| MRC | Criteria | Characteristic |
|---|---|---|
| AAUB | HOLE DIAMETER | 0.071 INCHES NOMINAL |
| ABGL | WIDTH | 0.250 INCHES NOMINAL |
| ABKW | OVERALL HEIGHT | 0.250 INCHES NOMINAL |
| ABPX | MATERIAL THICKNESS | 0.010 INCHES NOMINAL |
| ABRY | LENGTH | 0.200 INCHES NOMINAL |
| AXGY | MOUNTING METHOD | UNTHREADED HOLE |
| AZWE | DISTANCE FROM LOOP CENTER TO END | 0.123 INCHES NOMINAL |
| CJYS | LOOP/HOLDING DIMENSION | 0.175 INCHES NOMINAL |
| MATT | MATERIAL | COPPER ALLOY 170 OR COPPER ALLOY 172 OVERALL |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | QQ-C-533 FED SPEC ALL MATERIAL RESPONSES OVERALL |
| SFTT | SURFACE TREATMENT | CADMIUM AND CHROMATE OVERALL |
| End Use : 12300 | Finished metal shapes |
|---|---|
| Schedule B : 7326908530 (NAICS 332999) | Hangers and similar supports for tubes and pipes, of iron or steel |
| SITC : 69969 | Articles of iron or steel, n.E.S. |
| CRITL | The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. |
|---|---|
| HMIC | P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of federal standard 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item. |
| PMIC | U - Precious metal content is unknown |
| AAC | Z |
|---|---|
| Classification Control | U |
| MGMT_CTL | T2200x- |
| Quantity per pack | 1 |
| Repariability | This is a nonreparable item. if condemned or economically unserviceable, then dispose at the level authorized replace the item. |
| Shelf Life | N/A |
| SOS | Sms |
| Unit of Measure | Ea |
| ACC: | B - Construction materials: includes paint and related materials, prefabricated building, wood products, metal and composition mater |
|---|---|
| ADC: | A - Shipment is not a consolidation and does not exceed 84 inches in any dimension. |
| LTL: | Q - 70.0 |
| NMFC: | 094220 - Clips sheet steel noi |
| SHC: | 9 - Other or no special handling required (sh) |
| TCC: | Z - No special type of cargo code applicable |
| WCC: | 713 - Metal hardware |
