Are you looking quote for part 597-201? The American Coleman Company The-manufactured component (CAGE Code: 96606) is documented under NSN 2520-01-041-0277 as Shaft Axle Automoti. For the fastest quote, please complete our RFQ form with details about 597-201. We guarantee a response within 15 minutes.
ASAP Components provides the verified 597-201, classified under INC 10852, FSG 25 Vehicular Equipment Components, FSC 2520 Vehicle Power Transmission Components, NIIN 01-041-0277, and NCB 01. Submit your requirements today to receive immediate pricing and availability information.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 2520-01-041-0277 Item PartTypeName: SHAFT,AXLE,AUTOMOTIVE | 2520 | 010410277 | P | |||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | ||||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| 597-201 | 2 | 9 | 3 |
| MRC | Criteria | Characteristic |
|---|---|---|
| ABHP | OVERALL LENGTH | 36.565 INCHES NOMINAL |
| ABQB | TAPER MAJOR DIAMETER | 0.783 INCHES NOMINAL |
| AETC | METALLIC HARDNESS RATING | 55.0 MAXIMUM ROCKWELL C |
| AHTC | FLANGE OUTSIDE DIAMETER | 6.250 INCHES NOMINAL |
| AMGA | SECOND END SPLINE LENGTH | 2.250 INCHES NOMINAL |
| AMGB | SECOND END SPLINE MINOR DIAMETER | 1.560 INCHES MINIMUM AND 1.590 INCHES MAXIMUM |
| AMGC | SECOND END SPLINE MAJOR DIAMETER | 1.745 INCHES MINIMUM AND 1.750 INCHES MAXIMUM |
| AMQA | FIRST END TYPE | FLANGED |
| AMQF | SECOND END TYPE | SPLINED |
| AXHR | MOUNTING FACILITY TYPE AND QUANTITY | 8 TAPERED HOLE |
| BBCF | SECOND END SPLINE QUANTITY | 16 |
| BNPJ | FIRST END FACILITY DIAMETER | 1.874 INCHES MINIMUM AND 1.876 INCHES MAXIMUM |
| BNTB | FIRST END ENGAGING/LOCKING/POSITIONING FACILITY | SHOULDER |
| BNTC | FIRST END FACILITY WIDTH | 0.880 INCHES NOMINAL |
| BNTD | FIRST END FACILITY LOCATION | 16.750 IN. FROM FLANGE FACE |
| BNTF | FIRST END BEARING SEAT | NOT INCLUDED |
| BNTM | SECOND END SPLINE TYPE | STRAIGHT |
| BNTT | SECOND END BEARING SEAT | NOT INCLUDED |
| BNYS | FLANGE OVERALL THICKNESS | 0.617 INCHES MINIMUM AND 0.620 INCHES MAXIMUM |
| BNYT | FLANGE THICKNESS AT MOUNTING HOLE | 0.437 INCHES MINIMUM AND 0.440 INCHES MAXIMUM |
| BNYW | FLANGE HOLE TAPER | 4.249 INCHES NOMINAL PER FOOT |
| MATT | MATERIAL | STEEL |
| End Use : 21180 | Industrial machines, other |
|---|---|
| Schedule B : 8483909500 (NAICS 333613) | Parts, nesoi, of bearing housings & plain shaft bearings, housed bearings, clutches, universal joints, flywheels and transmission shafts |
| SITC : 74890 | Parts, n.E.S., for transmission shafts and cranks, bearing housings, gears, gearing, ball screws, gear boxes, flywheels and pulleys, clutches, etc. |
| CRITL | The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. |
|---|---|
| HMIC | P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of federal standard 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item. |
| PMIC | U - Precious metal content is unknown |
| ACC: | V - Trailers, vehicles, machinery, shop and warehouse equipment and supplies including special tools and equipment, ground servicing |
|---|---|
| ADC: | A - Shipment is not a consolidation and does not exceed 84 inches in any dimension. |
| LTL: | M - 85.0 |
| NMFC: | 019940 - Auto transmissions r clutches |
| SHC: | 9 - Other or no special handling required (sh) |
| TCC: | Z - No special type of cargo code applicable |
| WCC: | 586 - Vehicle parts, other than automobile |
