Are you looking quote for part 640969? The Am General Llc-manufactured component (CAGE Code: 34623) is documented under NSN 2520-00-737-4986 as Shaft Axle Automoti. For the fastest quote, please complete our RFQ form with details about 640969. We guarantee a response within 15 minutes.
ASAP Components provides the verified 640969, classified under INC 10852, FSG 25 Vehicular Equipment Components, FSC 2520 Vehicle Power Transmission Components, NIIN 00-737-4986, and NCB 00. Submit your requirements today to receive immediate pricing and availability information.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 2520-00-737-4986 Item PartTypeName: SHAFT,AXLE,AUTOMOTIVE | 2520 | 007374986 | P | |||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | ||||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| 18023 | 2 | 2 | 3 |
| MRC | Criteria | Characteristic |
|---|---|---|
| ACLL | FIRST END THREAD DIRECTION | RIGHT-HAND |
| AETC | METALLIC HARDNESS RATING | 42.0 MINIMUM ROCKWELL C AND 48.0 MAXIMUM ROCKWELL C |
| AMCP | FIRST END TAPER | 1.000 INCHES NOMINAL PER FOOT |
| AMCR | FIRST END TAPER MAJOR DIAMETER | 1.377 INCHES NOMINAL |
| AMCZ | FIRST END KEYWAY WIDTH | 0.2485 INCHES MINIMUM AND 0.2505 INCHES MAXIMUM |
| AMDG | FIRST END KEYWAY DEPTH | 0.127 INCHES MINIMUM AND 0.137 INCHES MAXIMUM |
| AMGA | SECOND END SPLINE LENGTH | 1.500 INCHES NOMINAL |
| AMGB | SECOND END SPLINE MINOR DIAMETER | 1.039 INCHES MINIMUM AND 1.049 INCHES MAXIMUM |
| AMGC | SECOND END SPLINE MAJOR DIAMETER | 1.222 INCHES MINIMUM AND 1.227 INCHES MAXIMUM |
| AMQA | FIRST END TYPE | TAPERED |
| AMQF | SECOND END TYPE | SPLINED |
| AQSQ | FIRST END THREAD SIZE | 1-14 |
| ATKT | FIRST END THREAD SERIES | UNF |
| BBCF | SECOND END SPLINE QUANTITY | 10 |
| BNTF | FIRST END BEARING SEAT | NOT INCLUDED |
| BNTM | SECOND END SPLINE TYPE | STRAIGHT |
| BNTT | SECOND END BEARING SEAT | NOT INCLUDED |
| BNYZ | FIRST END PIN HOLE DIAMETER | 0.172 INCHES NOMINAL |
| ABHP | OVERALL LENGTH | 21.428 INCHES MINIMUM AND 21.478 INCHES MAXIMUM |
| MATT | MATERIAL | STEEL COMP 1033 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | SAE 1033 ASSN STD SINGLE MATERIAL RESPONSE |
| End Use : 21180 | Industrial machines, other |
|---|---|
| Schedule B : 8483909500 (NAICS 333613) | Parts, nesoi, of bearing housings & plain shaft bearings, housed bearings, clutches, universal joints, flywheels and transmission shafts |
| SITC : 74890 | Parts, n.E.S., for transmission shafts and cranks, bearing housings, gears, gearing, ball screws, gear boxes, flywheels and pulleys, clutches, etc. |
| CRITL | The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application. |
|---|---|
| HMIC | P - Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of federal standard 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item. |
| PMIC | U - Precious metal content is unknown |
| AAC | Y |
|---|---|
| Classification Control | U |
| MGMT_CTL | 15c2--- |
| Quantity per pack | 1 |
| Repariability | This is a nonreparable item. if condemned or economically unserviceable, then dispose at the level authorized replace the item. |
| Shelf Life | N/A |
| SOS | S9c |
| Unit of Measure | Ea |
